Airsoft Ohio Forums  
  #1  
Old 08-02-2011, 07:03 PM
m1stam1l3s m1stam1l3s is offline
Registered User
 
Join Date: Nov 2007
Posts: 7
m1stam1l3s is a Private
iTrader: (1)
Massive GBB Sale (WA, KWA, TM, INO)

To contact me: email me at milesmianecki@gmail.com

WA Kimber Swat LAPD custom, Upgraded springs, aftermarket barrel, Creation silver metal slide - $260

WA Kimber Match II, upgraded springs, aftermarket controls (metal), Prime metal slide - $300

WA Kimber TLE (Silver, with wood grips), Prime slide, upgraded nozzle, RS grips, upgraded springs - $260

WA Limited Prokiller with Prime Limcat metal slide, upgraded nozzle and springs $350



WA 3.9 Tac Carry, Prime Slide, SD springs $320



WA Prokiller, Stock $200 (full auto)

WA Prokiller, Stock $210 (full auto, upgraded springs)



WA Wilson 4.3 1911 $200 (Not pictured, metal controls, RS grips, super rare)

WA OEM Parts package (slides, frames, one metal slide, MSH's) $160

PM me for pictures.

KWA TMP, 6 Magazines $365

WA Infinity 5' - Fully upgraded, ask for parts list $320

Army L85 with ACOG 4x and 5 magazines+battery $240

Dboys PDW with PEQ15, Eotech, battery and 5 magazines $240












Adding Inokatsu MTW GBBR Packages, I bought these two rifles off a very experienced owner. I am using his descriptions as I have never fired the rifles, but I will get around to it just to test and make sure everything is good and as described

Details

*** Inokatsu MTW Super ***
-Stock 09 Super internals
-RS AR buffer spring and weight
-RA Tech Complete BCG w/ Aluminum NPAS for Prime/Inoktasu
-Original Complete Steel Inokatsu Steel BCG (included as an extra for running the MTW on Red Gas)
-UTG RAS
-VLTOR railed flip-up front sight and gas block
-MAGPUL milspec CTR stock (Black)
-MAGPUL milspec MOE pistol grip (Black)
-MAGPUL MBUS (Black)

*** Accessories ***
- Rubberized Muzzle Cover
- MAGPUL XTM modular Rail Covers (5 set black, 5 sets tan)
- Replica Aimpont Comp2 with 30mm mount (full aimpoint trades)
- G&P PEQ2 Red Laser/Flashlight Combo with low/high selector (Zeroed at 75 ft)
- G&P Vertical Grip with pressure pad and PEQ2 wiring
- GHK 50 Rnd Magazines with G&P reinforced O-ring sets installed X 5
-ProWin New Generation Magazine with enhanced rollers X 1
-OD bungee one point sling
-large gun bag

Description of Sale

I picked up this rifle earlier this year in amazing external shape, however the previous owner had been a little rough on the BCG with red gas, and had severely overgreased the internals. I bought the RA Tech BCG with the notion of playing CQB with it, but the kick at 330 fps was nowhere near as fun as the kick at 450 fps, so it has since been only used in the field on two occasions (NPAS turned almost all the way up). I fixed the original steel bcg and swapped out the internals for a second set of brand new Inokatsu 09 Super version guts, because it was meant to be my primary "holy grail" milsim gas PTW and now its running like a dream. I am ridiculously sad to have to part with it, as I'm being forced to, its really not my choice. Included in the package is absolutely everything I have used to run this gun, including 6 Magazines, all for Propane/Top Gas, and one for red. I need it all gone in one piece because I have to leave it here. Looking for 1000 obo, as this rifle is well cared for, a beast, and comes with many extras. The G&P PEQ2 laser/CREE combo is 200 dollars alone and retardedly hard to find (its the best PEQ2 replica made to date).






$1200 OBO

Details
*** G&P WOC/Ino 08 Build ***
-AABB reciever set (lower and first upper configuration)
-G&P M4 Front set for WA
-G&P Brass 6.08mm Inner barrel
-AGM hopup unit
-AABB hopup rubber
-Iron Airsoft Upper reciever (second upper configuration)-Larue 13.2" RIS
-Dytac 14.5" Outer Barrel
-VLTOR Gas Block
-JDT CNC Aluminum Hopup chamber and Orange Rubber
-JDT Taiwanese 509mm Steel Inner Barrel (6.03mm)
-King Arms full traded foam filled suppressor

-G&P buffer tube
-MAGPUL MOE Stock (Commercial spec) OD
-MAGPUL MOE pistol grip (Commercial spec) OD
-Inokatsu 08 MTW Steel Hammer/Sear/Selector/Trigger
-G&P 150% Reinforced Spring and Pin Set for WA M4A1 series
-AABB Aluminum Buffer Lock
-AABB Steel Magazine Catch
-Waterloo Steel Bolt Catch
-V-Tech Forward Assist set
-G&P buffer weight
-130% G&P Buffer Spring
-G&P silver complete VLTOR BCG (extra, seen in pic with LaRue RIS)
-WA Dim Gray heavyweight bolt with RA Tech Aluminum NPAS (seen in pic with G&P front set)

Accessories
-EOtech 553 replica
-Surefire G3 replica (ultrafire)
-Surefire G3 mount
-GHK 50 rnd Magazine with G&P reinforced O-ring set X1
-3 position V-tech Sling mount
-OD one point sling
-Extra 6 position G&P stock (seen in pic with rain barrel)
-Extra AGM m4a1 pistol grip (seen in pic with rain barrel)
-Glowstick/earplugs because they look awesome

Description of Sale
I spent a little over a year building this rifle from scratch. Was initally supposed to be a long range gas semi-auto build, but I purchased another upper to build off of for a cqb configuration. What you are getting here are essentially two rifles, each based on the legendary reliability of the aluminum NPAS and Inokatsu internals (unfortunately G&P WOC externals and Inokatsu/Prime externals don't match up so I had to be content with the swapped internals only). I have owned this rifle for around a year and a half, and I want to make it clear that I have never had to replace parts, I have simply upgraded them the to most rugged standards possible. This rifle is the epitome of rough and tumble. The RAS comfiguration is simple, light, and durable, and has a great little kick to it. The long range configuration, to put it bluntly, outranges anything I have seen on a field, and is very light in its own right. This gun was built to my highest standards, because I built it for myself and not for anyone else.

Asking Price - $850 (This is for everything including the two uppers)





Buy both MTW's for $1600
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Massive Yard Sale! ALL KINDS OF Gears! Must GO! halon1301 Everything Else 70 05-09-2012 03:09 AM
AEG Mini-Guide RandomAdminGuy Newbie FAQ 0 01-04-2010 03:32 PM
WTS: Big Huge Sale (TM PSG-1, G&P Stubby Killer, HSGI Weesatch, 2Roy PVS14) zulu342 Electric-Powered Weaponry 6 09-04-2009 12:55 PM
Huge Armalite parts sale (for AEGs and WA GBB) Speculator Electric-Powered Weaponry 3 05-10-2009 07:49 PM
AEG Mini-Guide, Prices, Gearbox Information, etc. Loki Newbie FAQ 2 04-21-2007 11:55 PM


All times are GMT -5. The time now is 11:44 PM.


Airsoft Guns, Tactical Gear, Military Gear, Ohio Airsoft Retailer

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright 2005 - 2009 Airsoft Ohio